As I have described in my previous article about non-destructive excavation so this is almost same thing which is non destructive digging the only difference in between non-destructive excavation and non-destructive digging is that a non-destructive excavation is a process for excavation on large scale like for building construction and any other large constructions which requires many excavation in order to prepare strong pillars while on other hand non-destructive digging can be done for various application for an example, an installation of a tree in your house, shop, commercial places like office and public places and industries and in gardens no matter it’s a residential or commercial garden, furthermore, non-destructive digging can also be used for an installation of street poles on which street light are fixed, non-destructive digging can also be used to installed any application which requires digging in order to get the strong bases, you might have notices that in house gardens there were some small lighting or lamps are installed for evening time to make a look so these small pillar shape requires a non-destructive digging to get installed. Well there are many other applications which needed a dig and it is an essential to get it done through non-destructive digging process.
In an addition, a non-destructive digging process is done with a very handy machine which is fully automatic. Let us discuss more about non-destructive digging machine working and process which is also the focus of our today topic and heading too. So let us take an example in order to understand the working and process of a non-destructive digging machine. Suppose you wanted to install coconut trees all around your garden and throughout your house boundary walls so it is an obvious that you do not dig down the coconut seeds to let it grow and become tree because in this case your grandchildren might get benefits and get the three as it long time and process to be grown up and become a tree, this is not kind a joke but just to clarify. However, in this example we have to install a proper living coconut trees.
Moreover, in an order to .install them we might needed to dig big holes so that a complete coconut tree’s stem and root can be taken in by the soil and make the boundary on ground. It is quite difficult to dig down by the normal procedure through labours so if we use non-destructive digging machine than it become very easy as non-destructive digging would make the desired hole in the ground without wasting soil and place the tree and set it down accordingly and then filled it again with the same soil taken out this complete process of non-destructive digging only takes ten to fifteen minutes to be completed while the same process of non-destructive digging would requires more than three to four hour and labour become tired and not get the perfection.